Eagle Trends / Stress-Free.

The handyman service are often utilized in commercial construction and some residential homes. These posts are cheaper and lighter than wooden posts and are perfectly straight. They are fire, insect, and rot-resistant, fitting together like a child’s toy. You won’t know they’re metal when the prongs are covered in drywall until you hit one with a nail or screw when trying to hang something.

So, hiring a handyman is necessary as they’ll help you give the best services. And you can rest assured. Eagle Trends provides the best handyman services. Most screws and nails do not penetrate through steel studs. It is necessary to drill a hole.

The handyman service may be hanging a flat-screen TV, pictures, or mirrors on the wall or installing drywall inserts for various reasons. Self-tap stud inserts or drywall anchors work well for hanging items on metal studs covered with drywall. But even though they penetrate drywall well, they won’t dig into metal studs without drilling a hole, but the handyman services have to find it first.

Although wooden studs are superior to aesthetic metals, good painting work can make them difficult to distinguish. Before moving on to the complete walkthrough on how to drill metal studs (drill handyman studs), let’s briefly discuss the pros and cons of metal stud bolts.

The handyman service by the  Advantages of using metal stud bolts.

They are affordable compared to wood. Their lightweight, hollow nature makes them easy to use and move around job sites. Thanks to their resistance to termites, they do not require pest control treatments. They are more durable and rust-resistant; they are recyclable and do not emit volatile organic compounds.

  Disadvantages of Metal stud bolts.

They are difficult to machine. Cutting, folding, and structuring takes a lot of effort. Last-minute size changes are nearly impossible when working with metal stud bolts. Screwing or tap stud is quite tricky. It has a severe drawback of echo sound. Thermal insulation is poor when metal studs are used.

Method of drilling metal studs (drill handyman studs)

The handyman service Drilling metal studs are not much different from drilling simple metal. The main difference is in the cavity of the metal stud bolt (metal stud bolt is hollow, while regular metal is not). Below I have discussed a step-by-step approach to how to drill metal studs.

How to drill metal studs (drill handyman studs)?

The handyman service start by locating the stud in the wall using a stud finder. Trace the edges to find the center and mark the piercing point. Handyman uses sharp titanium, cobalt, or carbide drill bit with a medium torque drill for a cleaner hole in the metal stud bolt. The handyman service use only flat-head or drywall screws in the holes.

Locate Stud

They locate metal studs with an ordinary stud finder and then locate the stud’s center. Standard stud spacing for metal studs should be 12, 16, or 24 inches in the center. The stud finder will give the The handyman service a relatively accurate location, but metal studs are usually only 1 1/4 inches wide, and drilling a hole near the edge can compromise the stud or cause the hole to fail.

Find the edge, then the center

The handyman service use a tiny drill machine bit or a finishing nail inserted into a drill/driver to drill holes in the drywall on either side of the stud to locate the edges. A handyman may need to drill a few holes to do this, and a handyman can fix it later with putty or even toothpaste. When the handyman finds both sides, mark the center of the stud.

The handyman service Drill Bit Type

Almost all bits will penetrate steel studs, but using the wrong bit can result in tip failure or a rough, jagged hole. The handyman service use cobalt, oxide, titanium, or carbide drill bits for best results. They are often brightly colored gold or silver and penetrate steel studs again and again cleanly and without significant wear.

Screw counter gauge

There is no need for drilling holes to hang drywall; drywall screws go in without pre-drilling. Handyman uses thin drywall screws to hang drywall on 20–25-gauge steel studs to drill handyman studs. Use self-drilling drywall screws on 12–20-gauge studs. Standard threads. Screws spaced 8 inches along edges and 12 inches on center throughout.

The handyman service Attaching Trim

Pilot hole fixing is required for the baseboard or other wood paneling. Once the stud is located, place the liner in place, drill a 1/4-inch countersunk hole, then continue drilling only the liner, do not drill through the stud with a 1/8-inch drill bit. Use one 1/2-inch self-drilling screw to attach the sheathing to the drywall and studs.

Plumbing and Electrical Holes

The handyman service Carpenters use hole saws for large holes in studs for electrical and plumbing. But ordinary hole saws don’t cut metal effectively, if at all.

The handyman service Hole saw

The handyman service used a hole saw designed for metal. This kind of hole saw has hardened teeth, with less aggressive teeth closer together to cut cleaner holes. Consider a hacksaw blade, so the saw is less likely to bind.

Metal Stud Punch

If a handyman is not comfortable with a hole saw, the Metal Stud Punch (drill handyman stud) may be just what they’re looking for. This device looks like a regular drill, except it’s bigger and meaner to allow it to punch holes in steel. Fast and effective.

How to Drill Cast Iron

Cast iron is brittle, but as far as metals go, it’s not terribly difficult, so drilling a hole isn’t as difficult as you might think. Plus, they don’t have to be too picky about your tip. Any drill intended for drilling metal will drill through cast iron. The key is to take the time in order to avoid overheating and tip wear.

To Lubricate or Not to Lubricate

Although many machinists advise against lubricating while drilling cast iron, they do not entirely agree on the matter. Cast iron has a carbon of high content, and because carbon acts as a lubricant, it is often acceptable to drill cast iron without a lubricant.

The handyman service Drill Bits

Handyman doesn’t have to look very far for a while to drill cast iron, but not all drill bits are suitable either.

What should use

The best drill bit to utilize for cast iron is a cobalt drill bit with a 135-degree point angle. The angle is sharper than that of a conventional drill, making drilling faster and more accurate. Cobalt tips are brass-colored. Alternatively, The handyman service can also use a gold-colored titanium nitride tip.

What not to use

The only drill bits The handyman service should not use for drilling in cast iron are those intended solely for wood or masonry. Cast iron would completely destroy the nail point, and extra-wide grooves of a wood drill bit and a masonry drill bit is and drill handyman stud designed for use with a hammer drill;